UNIVERSAL TESTING MACHINE


Shanta Universal Testing machine is designed for testing Metals and other materials underTension , Compression, Bending, Transverse and Shear loads. Brinell Hardness Test on metals can also be conducted in smaller capacity UTM's.

All Shanta Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacturing. Every machine is than calibrated over each of its measuring range in accordance with the procedure laid down in BS 1610 and IS 1828. and comply with Grade “A” and Class 1.0 respectively.
 

SERIES SE-UTE

DIGITAL ELECTRO-HYDRAULIC UTM WITH MICROPROCESSOR BASED PANEL FOR MEASUREMENT.

SERIES SE-UTES

COMOMPUTER CONTROLLED ELECTRO HYDRAULIC SERVO UTM

 Shanta Universal Testing Machine are hydraulically operated.
Series SE-UTE is manually controlled with Microprocessor based Measuring Panel.
 Through RS232 it can be connected to PC for on-line graphic display and data storage,
     Test report generation and many other features as per customer requirement.
Series SE-UTES is Computer controlled with computerized measurement.
Electronic Clip-on Extensometer can be attached to above machines for measurement of
    Modulus of Elasticity (MOE) and Proof Stress.
Wide range of accessories comprising Standard and Special accessories are available.


SERIES SE-UTN
 
ELECTRO-HYDRAULIC UTM WITH DIAL DISPLAY AND AUTOGRAPHIC RECORDER
ELECTRO-HYDRAULIC UTM WITH DIAL DISPLAY
AND AUTOGRAPHIC RECORDER.

 Shanta Universal Testing Machine are
    hydraulically operated.

Series SE-UTN is manually controlled with
     Dial display.
     Dummy Pointer is provided to register peak load.
     Autographic recorder is attached to machine that
     gives Load-Displacement curve on a
     continuous chart paper.

Mechanical Clip-on Extensometer can be attached
    to above machines for measurement of Modulus
    of Elasticity (MOE) and Proof Stress with the help
    of manually drawn Load-Displacement curve.

Wide range of accessories comprising Standard
     and Special accessories are available.
TECHNICAL DATA
TECHNICAL DATA
 Gauge Length (In steps): 30-120mm
 Gauge Length: 25mm & 50mm
 Measuring Range: 0-3mm Measuring Range: 0-2mm
Specimen Thickness/Dia.: 1 to 20mm Specimen Thickness/Dia. 0.5 to 30mm
Resolution: 0.01mm Resolution: 0.001mm


TECHNICAL DATA SERIES SE-UTN

TECHNICAL DATA SERIES SE-UTN

MODEL

SE-UTM-10

SE-UTM-20

SE-UTM-40

SE-UTM-60

SE-UTM-100

Maximum Capacity (KN)

 100 200 400 600 1000
Load ranges 4 4 4 4 4
Measurement Range 2-100%FN 2-100%FN 2-100%FN 2-100%FN 2-100%FN
Accuracy Class as per BS-1610 & IS1828 Class 1.0 Class 1.0 Class 1.0 Class 1.0 Class 1.0
Clearance for Tensile (mm) 50-700 50-700 50-700 50-800 50-850
Clearance for Compression
test (mm)		 0-700 0-700 0-700 0-800 0-850
Clearance between Columns
(mm)		 500 500 500 600 750
Ram Stroke (mm) 150 200 200 250 250
Straining/piston Speed at no
load (mm/min)		 0-300 0-150 0-150 0-100 0-80

           CONNECTED LOAD

Model SE-UTM-10 SE-UTM-20 SE-UTM-40 SE-UTM-60 SE-UTM-100
HP 1.5 1.5 2.5 2.5 3.5
Power Supply 400-440V,
50Hz,3-Phase		 400-440V,
50Hz,3-Phase		 400-440V,
50Hz,3-Phase		 400-440V,
50Hz,3-Phase		 400-440V,
50Hz,3-Phase
Dimension (LXHXH) 2032 X 750 X 1960 2032 X 750 X 1960 2060 x 750 x 2180 2265 x 750 x 2534 2415 x 815 x 2900
Weight (kgs) 1500 1500 2500 3500 5500

STANDARD ACCESSORIES

MODEL

SE-UTM-10

SE-UTM-20

SE-UTM-40

SE-UTM-60

SE-UTM-100

For Tension Test

          
Clamping jaws for round specimen Dia, (mm) 10-20
20-30		 10-20
20-30		 10-25
25-40		 10-25
25-40
40-55		 10-25
20-45
45-70
 
Clamping jaws for flat
specimen (mm)		 0-10
10-20		 0-10
10-20		 0-15
15-30		 0-15
15-30		 0-22
22-44
44-65

Specimen Width (Max.)

 50 50 65 70 70

For Compression Test

          
Pair of Compression Plates,
Dia (mm)		 120 120 120 120 160
For Transverse Test          
Table w adjustable Rollers,
Width of Rollers (mm)		 160 160 160 160 160
Diameter of Rollers (mm) 30 30 30 50 50
Maximum Clearance
between supports (mm)		 500 500 500 600 800
Radius  of Punch Tops (mm) 6,12 6,12 12,16 16,22 16,22

OPTIONAL ACCESSORIES: These include Load stabilizer, Brinell Test Attachment, Mechanical
Extensometer, Electronic Extensometer, Shear Test Attachment, 1800 Bend Test Attachment etc.

Request a quote



Melt Flow Tester | UTM Single Column Testing Machine | Utm Twin Column Testing Machine |
UTM Thydraulic Testing Machine  | Izod & Charpy Impact Tester | Oxygen Index Tester |
Notch Cutter ( Motorised & Manual ) | Dart Impact Tester | Smoke Density Tester | Carbon Black Content |
Environmental Stress Cracking Tester  | VICAT / HDT Tester | Co-efficient of Friction Tester | Dart Impact Tester |
Equipments for cable testing | Torsion Tester for Insulators | Halogen Acid Tester | Sample Cutting Press |
Dumbbell Cutters | Drop Tester for Containers, Crates, Tanks etc. | Thermal Stability |
Kranti Briquetter | Melting Point


Home | Profile | Clients  | Feedback



Address : 10, Anusaya, Opp. Mangala High School, Kopari, Thane (E) - 400603, Maharashtra, INDIA
Factory : Pomal Industrial Area, Next to Wellman Company, Near Bayer India,
Dhokali - Kolshet Road, Thane (W) - 400607,
Maharashtra, INDIA * Tel. : 022 - 25893581 / 32503771 * Email :

Designed & Hosted by : MID Promoted by : GID